ATEN CN600, User Manual, Page: 47 / 120

5. The Windows Client
35
An explanation of the actions is given in the table, below:
Note: To invoke an action, you must press and release the keys one key at a
time – do not
chord the keys.
Configuring the Hotkeys
If you find the default Hotkey combinations inconvenient, you can configure
them to whatever suits your taste, as follows:
1. Highlight the Action, then Click Start
2. Key in the Function keys (one at a time). The key names appear in the Key
field as you press them.
3. When you have finished keying in your sequence, Click Stop
4. Click Set
5. Repeat for any other actions you wish to set up
Note: You can use the same function keys for more than one action, as long
as the first key is not the same . For example, you can use F1 F2 F3 for
one action; F2 F1 F3 for another; F3 F2 F1 for a third, etc.
Action Explanation
Exit remote location Break the connection to the CN6000 and return to local
operation.
Adjust Video Bring up the video adjustment utility.
Toggle OSD Toggles the OSD display Off and On.
Toggle mouse display If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this
function to shrink the non-functioning pointer down to a
barely-noticeable tiny circle - which can be ignored. Since this
function is a toggle - use the hotkeys again to bring the
mouse display back to its original configuration.
Adjust mouse This utility synchronizes the local and remote mouse
movements following a video resolution change. After
invoking this utility, simply click the local mouse pointer on top
of the remote mouse pointer.
Substitute Alt key Although all other keyboard input is captured and sent to the
CN6000, [Alt + Tab] and [Ctrl + Alt + Del] work on your local
computer. In order to implement their effects on the remote
system, a function key is be substituted for the Alt key. If you
substitute the F12 key, for example, you would use [F12 +
Tab] and [Ctrl + F12 + Del].
cn6k_2007-02.book Page 35 Wednesday, February 28, 2007 9:26 AM