ATEN CL6708MW User Manual Download Page 49

Page: 49 / 83

Chapter 4. OSD Operation

F8: LOUT

Clicking the

field, or pressing

[F8]

logs you out of OSD control of the

computers, and blanks the console screen. This is different from simply
pressing

[Esc]

when you are at the main screen to deactivate the OSD. With

this function you must log in all over again to regain access to the OSD,
whereas with

[Esc]

, all you have to do to reenter the OSD is tap the OSD

hotkey.

Note:

1. When you reenter the OSD after logging out, the screen stays blank

except for the OSD main screen. You must input your username and
password before you can continue.

2. If you reenter the OSD after logging out, and immediately use

[Esc]

to deactivate the OSD without having selected a port from the OSD
menu, a null port message displays on the screen. The OSD hotkey
will bring up the main OSD screen.

Summary of Contents for CL6708MW




















































































Search results

Summary of Contents for CL6708MW

Reviews:

Related manuals for CL6708MW

Brands by name

Popular brands

ATEN CL6708MW, User Manual

Search results

Summary of Contents for CL6708MW

Reviews:

Related manuals for CL6708MW

Brands by name

Popular brands