manualshive.com logo in svg

ATEN CL6708MW, User Manual

Share
Download
ATEN CL6708MW User Manual Download Page 2

CL6708MW User Manual

ii

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE 
STATEMENT: This equipment has been tested and found to comply with the 
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These 
limits are designed to provide reasonable protection against harmful 
interference when the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio frequency energy and, if 
not installed and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this equipment in 
a residential area is likely to cause harmful interference in which case the user 
will be required to correct the interference at his own expense.

The device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

FCC Caution: 

Any changes or modifications not expressly approved by the 

party responsible for compliance could void the user's authority to operate this 
equipment.

Warning: 

Operation of this equipment in a residential environment could 

cause radio interference.

Achtung: 

Der Gebrauch dieses Geräts in Wohnumgebung kann 

Funkstörungen verursachen.

KCC Statement

RoHS

This product is RoHS compliant.

Summary of Contents for CL6708MW




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands