CL6700MW User Manual
10
To rack mount the CL6700MW, do the following:
1. While one person positions the CL6700MW in the rack and holds it in
place, the second person loosely screws the front brackets to the rack.
2. While the first person still holds the CL6700MW in place, the second
person slides the L brackets into the CL6700MW's side mounting brackets
from the rear until the bracket flanges contact the rack, then screws the L
brackets to the rack.
3. After the L brackets have been secured, tighten the front bracket screws.
Note:
Allow at least 5.1 cm on each side for proper ventilation, and at least
12.7 cm at the back for the power cord and cable clearance.
Summary of Contents for CL6700MW
