ATEN CE750A, User Manual, Page: 13 / 36

Chapter 1. Introduction
5
Components
CE750AL (Local Unit) Front View
No. Component Description
1 KVM Port Section If you are combining the CE750A with a KVM switch,
the custom KVM cable set that links to the respective
ports on the Console section of the switch plugs into
these ports.
2 RS-232 Serial Port This RS-232 serial port is for connecting to a serial
terminal for configuration.
3 Operating Mode
Pushbutton This pushbutton toggles between the Operating
Modes available from the Local Console:
Š
Local – only the Local Console can control the
system(s).
Š
Auto – both the Local and Remote Consoles can
control the system.
Note: The default operating mode is Auto . See
Operating Modes , page 17, for full details.
4 LEDs The CE750AL has two LEDs to indicate the operating
status of the Local (CE750AL) and Remote
(CE750AR) Units. See
LED Display , page 20, for full
details.
3 1
4
2
ce750a.book Page 5 Monday, January 7, 2019 8:01 PM