ATEN CCKM, User Manual, Page: 205 / 466

Chapter 3. OSD Operation
181
CCVSR
Important operations occur on the transmitter can be recorded using the
CCVSR program.
Check
Enable
to enable the CCVSR function and specify the
MAC address
and the
Service Port
of the computer the CCVSR runs on.
Note: The valid port range is 1–65535. The port number must different than
the one used for the
Program port (see Service Ports , page 179).
Working Mode
Use this section to set the working mode parameters.

Enable ICMP : Check to enable ICMP service.

Disable Browser Service
: Check to disable a particular access. Available
options are: browser, http or https.

Enable Client AP Device List : Check to enable this function. When
enabled, the unit will be discoverable in the Server List when using the
WinClient or Java Client AP (see
Starting Up on page 325). Disabling this
function will render the unit undiscoverable in the Server List but can still
be connected to.
After entering the information, click Save .