4 of 5
LEDs
2 Output Status
2 Input Status
I/P Port Selection
X
Auto/Manual
O/P Port Selection
Software/Manual
X
Timeout
X
15, 45 sec.
File Transfer
X
Yes
O/P Port Selection
Yes
X
Enclosure
Plastic
Weight
150g
Dimensions (LxWxH)
102 x 85 x 26 mm
About the Software
The software allows you to select Port A, Port B or both ports as broadcast in 1-to-2 mode. Please read the
READ.ME file in the floppy disk.
Series Products
AF-152, AF-251, AS-8144B, AS-8441B, AS-8154B, AS-8451B.
Troubleshooting
LED locks on a port when a cable is connected:
The ParaHub receives signal glitches and starts time-out counting. If the connecting printer is
ready, just wait till the time-out expires.
The ParaHub is low on power, turn on one more device, or apply power adapter.
1.
The printer status Windows shows "printer not responding" or "cable not connected" intermittently:
AF-142 and AF-241 do not emulate printer responses. Therefore, when status Windows poll for
printer status at the same time, these messages show up.
2.
Error messages show up while or after installing new printer drivers:
Un-install other bi-directional printer status Windows before installing a new one.
Press the button to lock your computer to the printer before installing a new printer driver.
3.
Compatibility
The ParaHub is tested and is compatible with the following devices:
IOMEGA:
ZIP DRIVE, DITTO800, DITTO2000, DITTO3200
SEAGATE:
TSTORE3200E
SYQUEST:
EZFLYER
SONY:
STORSTATION
VIDEO CAPTURE:
GOCHA, GRABIT, SNAPPY
INTERNET PHONE SYSTEM:
SPECOM SUITE VISIONS
QUICKCAM:
DIGITAL CAMERA
SCANNER:
PAGEWIZ
MICROSOLUTION:
BACKPACK CDROM
