M
As each device update completes, its status is reported in the Status
Messages panel.
M
When a device group upgrade is successful, the background behind the
device group name changes to pink to indicate so; if a member of a
device group fails to upgrade successfully, the background behind the
device group name changes to red to indicate that there was an upgrade
failure in the group. Check the Status Messages to ascertain which
device failed to upgrade.
5. When upgrading for all the devices has completed, click Finish to close the
Firmware Upgrade Utility.
Upgrade Failure
If the upgrade fails to complete successfully for all devices:
1. Click Finish to close the Firmware Upgrade Utility.
2. Start the firmware upgrade procedure again (see p. 61).
3. When the Device List is complete, Click on the device group that the failed
device belongs to in the Device List panel (see p. 62).
4. Click Next to start the upgrade.
2003-12-15
64
Summary of Contents for ALTUSEN KM0432
