ATEN ALTUSEN KM0432, Instruction Manual, Page: 13 / 80

KM0432 Front View
1. Firmware Upgrade Recovery Switch
During normal operation and while performing a fimware upgrade, this
switch should be in the NORMAL position. If a firmware upgrade
operation does not complete successfully, slide this switch to the
RECOVER position and do a warm reset (see p. 6), to return the switch to
its prior firmware state.
After returning the switch to its prior firmware state, slide the switch back
to the NORMAL position to attempt the firmware upgrade again, or to use
the switch with its prior firmware.
2. Port LEDs
The Port LEDs are multicolored (Red / Green / Amber), and provide status
information about their corresponding CPU Ports as follows:
Color Condition Indication
Amber Steady Port is selected; connected computer is On
Flashing Port is selected; port is cascaded to a powered
on KVM switch
Red Steady Port is selected; connected computer is Off
Green Steady Port is not selected; connected computer is On
Flashing Port is not selected; port is cascaded to a
powered on KVM switch
Off Port is not selected; connected computer is Off
4-USER, 32-PORT MATRIX KVM MODEL NO. KM0432
3 1 4 5
2
2003-12-15
5