3
PARTS OF THE MACHINE
CRADLE AND SUPPORT GROUP
During the Rim Polishing It provides to touch the
brush easily whole surface of the rim.
MIRROR
It provides you to fix the
12‖-28‖ Rims easily via
tightening by help of
outside&inside clamping
arms and pedals
RIM POLISHING GROUP
During the Rim Polishing After connecting
suitable brush to required parts you can
continue the operation easily
COMMAND GROUP
During the Operation İt makes
you direct the machine.
DUST VACUUM FILTER
When you connect the the hose of the
vacuum to The part (which is shown in the
figure) , During the operation When you start
the vacuum , you willl not see dust on the
machine and around the machine
.
PEDAL
SİSTEMİ
Jant sıkma işlemini yaparken aynayı açıp
kapatmanızı sağlar.
PEDAL GROUP
Hydraulic Power unit was fixed on the main
body by connecting screw .It works
suitably to well known standart hydraulic
princibles ,It provides all movements of
units of the machine ,It pumps the hydraulic
oil to hydraulic cylinder. It consists of
Hydraulic Pump mechanism &Electric Motor
(it takes its power from it)
BALANCER GROUP
During
the
Rim
Tightening
operation It provides the rim to
center the mirror easily and
makes clamps clutch the rim
easily.
HORIZONTAL CRADLE GROUP (PNEUMATIC)
During the operation It provides the brush to go
forward and back
