12
Operating and Safety Instructions
5.2.6. If the cutters rotate in reverse direction, it will cause danger for the
operator and the equipment.
6. MACHINE SAFETY INFORMATION
6.1. It is not allowed to operate the machine with the protective cover and other
protective equipment removed.
6.2. Lifting, installation, electric, pneumatic maintenance of the machine should
be carried out by qualified personnel only.
6.3. Routine maintenance and scheduled maintenance should be carried out by
qualified personnel after unplugging the machine and disconnecting the air
supply first.
6.4. Ensure that the machine has been cleaned, tested and maintained before
starting to operate.
6.5. Check the safety devices, power cable and moving parts regularly.Don’t
operate the machine before having replaced defective safety devices or faulty
parts.
6.6. Never replace the milling cutters before unplugging first.
6.7. Keep foreign materials away from the working area of the machine, keep
away from the machine’s moving parts.
The safety data have been defined above. In order to prevent physical damage
or damage to the equipment, please read the safety information carefully and
keep the manual always in an easy accessible place.
IMPORTANT
Summary of Contents for ZETA-02 A
Page 1: ...1 Operating and Safety Instructions ZETA 02 A AUTOMATIC DOUBLE GLAZING BEAD SAW User s Manual ...
Page 5: ...5 Operating and Safety Instructions FIGURE 1 2 3 DIMENSIONS 110 cm 105 cm 46 cm 200 cm ...
Page 6: ...6 Operating and Safety Instructions FIGURE 2 2 4 GENERAL VIEWS ...
Page 7: ...7 Operating and Safety Instructions FIGURE 3 FIGURE 4 ...
