14
WArrAnTY
& sErViCE
MAinTEnAnCE
CAUTION
Be sure your machine is unplugged prior to performing any service.
The primary wear components on your Casey Pro 3G are the throwing wheels. These do
not require attention unless ball control is affected. Some material build up left by balls is
typical and may or may not affect accuracy.
gEnErAl CArE
Dirt and material build-up on wheels can typically be removed using a mild dish soap
and warm water. Always rinse thoroughly and never use a commercial cleanser or
“revitalizer” like Armor-All
®
on your wheels.
Should your wheels require something more, call ATEC Technical Services.
Your wheels use an elastomeric urethane for its better wear and memory features
as well as to provide the best ball control. This material, by nature is very pliable. To
maintain optimum performance you should never store or transport your Casey Pro
3G laying it on its throwing wheels. Also, you should never store or transport your
machine in an environment that will exceed 120°F.
TrouBlEshooTing
inoperative:
• Check and reset, if necessary, the circuit breaker on the speed control box.
If breaker trips repeatedly, call ATEC.
• Check to be sure wheels will turn by hand and are not ‘locked-up’.
If locked, call ATEC.
• Using a voltmeter, verify 110-120V AC from your power supply. If not, call
an electrician.
speed Consistency:
• Confirm ball condition. Be sure all balls are of like wear and type. Try a new ball.
If not correctable, call ATEC.
Erratic Pitches:
• Check ball condition. Be sure all balls are of like wear and type. Try new ball.
Assure you are allowing at least 6 seconds between pitches. Check wheels for
build-up or wear. Clean or replace.
WArrAnTY
Your Casey Pro 3G comes with a Lifetime Limited Warranty.
Under normal use and care, Athletic Training Equipment Company
guarantees to the original owner, the Casey Pro 3G to be free from
defects in materials and workmanship with the following limitations,
1) Lifetime on all structural components.
2) Two years on all moving and wear components.
During this period ATEC will repair or replace with new or refurbished components,
at ATEC’s sole discretion, any component found to be defective without cost to the
owner, provided the defective product is returned to the factory freight prepaid for
such service.
Consult ATEC or your local dealer for details.
Should you have any questions or require service assistance, please contact
ATEC Technical Services at 1-800-758-2832.
www.atecsports.com
655 Spice Island Dr. Sparks, NV 89431
W
A
R R A N
T
Y
W
A
R R A N
T
Y
LIFETIME
LIFETIME
LIFETIME
L
IM
I T E
D
L
IM
I T E
D
t r a i n i n G / o P e r a t i o n M a n u a l
