background image

10

LIMITED SIX-YEAR WALL MOUNT WARRANTY

 

We warrant this product to you, the original purchaser at the time of purchase printed on a dated store receipt from 

an authorized ATEC retailer and for a period of six-years thereafter that our wall mount product and all it’s parts 

and components are free of defects in material and workmanship under normal use. This warranty is subject to 

the provisions below. ATEC’s sole obligation and the purchaser’s exclusive remedy pursuant to these warranties 

are limited to replacement at ATEC’s sole discretion. There are no other warranties except as expressively set 

forth below either expressed or implied, including any warranty of merchantability for any particular purpose. 

Should  you  be  missing  any  of  the  assembly  parts  or  components  (screws,  pieces,  etc.),  please  contact  the 

Customer Support Center to secure a replacement. It is not necessary to bring the unit back to the store. When 

calling, please reference the parts list found in the Instruction Manual to help us accurately identify the missing 

parts and promptly provide replacements. 

Our Customer Support Center is available Monday to Saturday (10:00AM to 7:00PM EST) for technical assistance 

or troubleshooting. To contact us please call 1-800-936-1186. 

This warranty is expressly limited to the replacement of wall mount parts and components described in the parts 

list located in the Instruction Manual included with the product. 

This warranty applies under conditions of normal use. 

This warranty does not cover: any product, which has been subject to damage due to improper assembly or 

disassembly, products which were not assembled, installed, used, or maintained in accordance with the product 

assembly  instructions  &  warnings,  acts  of  nature,  misuse,  neglect,  accidents,  abuse,  exposure  to  elements, 

outdoor use, extreme temperature ranges, damage during transit, commercial use, modification of, or to any part 

of  the  product  or  attachments  to  the  product  not  approved  by  ATEC.  Also  not  covered  are  costs  for 

assembly/dis-assembly labor, costs incurred in shipping the unit or parts for warranty repair/exchange or any 

products purchased from unauthorized ATEC sellers. Under no circumstances shall ATEC, be liable for any loss 

(direct, indirect, incidental, foreseen, unforeseen, special or consequential) or for any damage arising out of, or in 

connection with, the use of this product. Nor shall ATEC have any responsibility for incidental or consequential 

damages resulting from the breach of this warranty including but not limited to inconvenience, purchase or rental 

of replacement products, loss of profits or commercial loss.

We reserve the right to request damaged parts or units be shipped to our offices for inspection or confirmation of 

any warranty claims.

This warranty does not cover product sold ‘As Is’.

This warranty is valid only to the original purchaser of the Product in the United States and Canada and grants 

specific legal rights.

Summary of Contents for A570TS













Reviews: