Step 4. Attach Mounting Head to Monitor
Step 5. Attach Monitor onto Arm Assembly
(How do I remove the Monitor? See final page for help)
1.
Select appropriate Display Mounting Screws from hardware ‘BAG B’ to suit the
monitor, and fasten the Mounting Head to the back of the monitor.
1.
Align and locate the Mounting Head onto the mounting point
at the top of the arm assembly.
NOTE:
To remove the monitor, refer to instructions on the final
page.
2.
If necessary adjust the swivel tension to increase head
stability. Use the 2mm Allen Key supplied.
3.
Insert Security Screw to secure mounting head to Arm
Assembly
ecessed Mounting Holes or
Display with a Curved Rear Pane
If the Mounting Holes are recessed into the
back of the monitor, or the monitor has
a curved rear panel, use the Spacer Bushes
supplied to pack the Mounting Holes.
R
l
2.
Push the Cover Plate over the
Mounting Head.
Press firmly around the inside edge
until you hear a ‘CLICK’.
2mm Allen
Key
MORE TENSION
(clockwise)
LESS TENSION
(anti-clockwise)
Mounting Head
Mounting point
PUSH
DO NOT
OVERTIGHTEN
Security Screw
TOP OF
MONITOR
PUSH
PUSH
Display Mounting
Screws (x4)
Cover Plate
Mounting Head
Mounting Hole
Spacer Bush (x4)
Display Mounting
Screws (x4)
Mounting Hole
M4x20mm
