AWMS-BT40 Page 4 of 4
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©
20221222
7. Fine adjustment
8. Cable management
CABLE COVERS
8.5
Load cables
into cable cover.
CABLE CLIPS
8.2
Load cables into
cable clip.
8.6
Clip the
cable cover
onto post
channel.
7.1
To correct horizontal angle
of d/- 3 °:
Turn a single fine tune
adjustment knob to adjust angle
of screen.
CLOCKWISE = HIGHER
ANTI-CLOCKWISE = LOWER
7.2
To fine tune height without
removing /-6mm (1/4”):
Turn both fine tune adjustment
knobs - alternating sides a few
rotations at a time.
8.1
Cable clips and covers
can be clipped onto any
post channel. The rear
channel is recommended.
8.3
Insert one side of the
cable clip into a channel
on the post, then push in
the other side.
8.4 (OPTIONAL)
Cable covers can
be clipped on
over the cable
clips.
HINT:
Cable covers
have greater cable
capacity.
+/- 6mm (0.25”)
Micro adjustment - Fine tune height
+/- 3°
Micro adjustment - Levelling
FINE HEIGHT ADJUST
FINE ADJUSTMENT
KNOBS
NOTE:
Ensure clips are in
CLOSED
position
PUSH
Cables can
exit from
the side of
the cable
cover
PUSH
PUSH
Load cables into
cable cover
WARNING:
Always remove display
before
adjusting height
Unstacked
Stacked
