AWMS-BT40 Page 2 of 4
2. Attach VESA plate to display
2.1
VESA compatibility
3.1
Tilt bracket must only be attached with
display facing the front of the mounting
surface unless fixing is AC-GC.
NOTE:
Some displays require the use of a VESA adapter before attaching the VESA plate. This VESA adapter may ship in the
box with the display. Consult your display’s installation guide for further information.
1. Attach post to fixing (fixing sold separately)
1.1
Follow the installation guide
provided with the fixing to
attach the post and fix it to the
worksurface.
1.2
Remove cable clips and covers
from post by sliding up and out or
by squeezing sides.
AWM-FC
C Clamp
AC-GC
Grommet
Clamp
AWM-FH
Heavy Duty
F Clamp
3. Slide bracket onto post
3.2
Line up the inner guide on rear of
bracket with rear channel on post.
Slide inner guide into channel, then
lower the bracket.
PLAN VIEW
AWM-FC
C Clamp
AC-GC
Grommet
Clamp
AWM-FH
Heavy Duty
F Clamp
75mm
100mm
75mm
100mm
NOTE:
For 75mm
VESA
unscrew
5mm to
access
top holes
C
I
J
C
H
TOP
WORK
SURFACE
C
B
BACK OF
DESK
INNER
GUIDE
POSITIONED
IN REAR
POST
CHANNEL
Option B
- For recessed VESA use
10mm spacers and M4x20 screws.
Option A
- Attach VESA plate
with M4x10 screws.
SQUEEZE
to release
