AWMS-46W35 | Page 6 of 7
Tighten
Loosen
Tighten
Loosen
5.
Mount monitor
Monitor arm
5.1
Insert VESA head into the monitor arm
5.3
Push the lever down to secure
it to the arm assembly
5.2
Ensure that the VESA head sits flush within
the monitor arm. There should be
no
gap
Gap
No gap
6.
Adjust tilt tension & Install security screw
6.1
Use the allen key to adjust the tilt tension until the monitor
holds in a vertical position at the end of the arm.
Note:
Support
monitor while
adjusting.
6.2 OPTIONAL security screw
To install the optional security screw tilt the head upwards
4.
Attach VESA head to monitor
100mm
75mm
100mm 75mm
Flush
Too long
Too short
Spacer
5mm
12mm
4.2
Screw the VESA head onto monitor
Note
spacers may be required for curved,
recessed or uneven monitor surfaces.
4.3
Ensure the correct screw length is used
to attach the monitor.
4.1
VESA mounting compatibility
100mm
75mm
100mm 75mm
Flush
Too long
Too short
Spacer
5mm
12mm
Note:
For other sizes, use a suitable
adaptor plate (sold separately).
