AWMS-NDB-F Page 7 of 7
9.
Adjust Notebook Tray
9.1
Pan tray to desired position.
9.2
Position and align notebook with other monitors.
+/- 5°
Levelling
Adjustment
8.5
Cable clips and covers
can be used to further
manage cables.
Note:
After
connecting the
notebook computer
cables, route them
through the cable
management clip
on the back of the
Notebook Tray.
Note:
Ensure enough
cable slack is given to
allow for movement.
LIFT
10.2
Attach VESA head onto display with
provided screws.
You may choose to convert your solution to mount a display, to do so:
100mm
75mm
100mm
75mm
Flush
Too long
Too short
Spacer
5mm
12mm
10.3
Be sure to use correct screw
length
10.1
VESA mounting compatibility
100mm
75mm
100mm
75mm
Flush
Too long
Too short
Spacer
5mm
12mm
Note:
For other sizes, use a suitable
adaptor plate (sold separately).
Note:
Spacers may
be required
for curved,
recessed
or uneven
display
surfaces.
Display arm
10.5
Ensure that the VESA head sits flush
within the display arm. There should be
no
gap.
10.4
Insert VESA head into the display arm
10.6
Push the lever down to
secure it to the arm assembly
Gap
No Gap
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©
20220509B
