AWM-A46 Page 3 of 4
4.
Attach VESA head to monitor
100mm
75mm
100mm 75mm
Flush
Spacer
4.2
Ensure the monitor is attached correctly
4.3
VESA mounting compatibility
100mm
75mm
100mm 75mm
Flush
Spacer
Note:
For other sizes, use a suitable
adaptor plate
4.1
Screw the VESA head onto monitor
Note:
spacers may be required for
curved, recessed or uneven monitor
surfaces.
Tighten
Loosen
Tighten
Loosen
5.
Mount monitor
Monitor arm
5.1
Insert VESA head into the monitor arm
5.3
Push the lever down to secure
it to the arm assembly
5.2
Ensure that the VESA head sits flush within
the monitor arm. There should be
no
gap
Gap
No gap
6.
Adjust tilt tension & Install security screw
6.1
To make for easy tilt adjustment and to prevent the monitor
from falling forward, adjust the tension as show below
Note:
Support
monitor while
adjusting.
6.2 OPTIONAL security screw
To install the optional security screw tilt the head upwards
