AWM-A46 Page 2 of 4
1.
Optional 180� rotation limiter
3.
Mounting arm assembly
3.1
Slide arm assembly into channel
3.2
Move to desired height
Note:
Ensure
clamp lever is
vertical and
unlocked
Note:
Squeeze and
hold clamp jaws
before inserting
Post
3.3
Lock at preferred height
by pushing lever down
Wall Channel
‘Click’
Note that the arm is set to rotate 360� by default. To reduce the arm’s rotation to 180�, follow the steps below.
1.1
Remove plastic sleeve
1.2
Remove rotation ring
1.3
Place rotation ring in
desired orientation/position
Note:
Place the rotation ring
depending on what post channel
the arm will be attached to. The tag
should always face towards the user.
1. Press
2. Lift
180°
360°
OR
Default
Position
Flipped
Position
Tag
2.
Fit arm onto channel clamp
2.1
Push arm onto clamp
2.2
Ensure arm is fully pushed onto clamp
2.3
Lightly tighten set screw
Tip:
Check that
rotation of the
arm is smooth
Fit top cap on post
