AWM-A13 Page 4 of 4
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©
20220830
6.
Monitor arm cable management
Ensure enough
cable slack is
given to allow
for movement
of the monitor
6.1.
Plug cables into the monitor and
route the cables down the arm using
the cable hooks and clips.
7.
Post cable management
Load cables
into cable
cover
7.2.
To route
cables down
post, start
by removing
the post’s
cable covers
and clips.
Recommended
Position
CABLE CLIPS
7.3.
Load cables into cable clip.
7.4.
Insert one
side of the
cable clip into
a channel on
the post, then
push in the
other side.
7.5.
(OPTIONAL)
Cable covers
can be clipped
on over the
cable clips.
7.1.
Cable clips and covers can be clipped onto
any post channel however the rear channel is
recommended for good concealment.
Optional cable
cover positions
SQUEEZE
SQUEEZE
SQUEEZE
SQUEEZE
Cables can
exit from the
side of the
cable cover
PUSH
PUSH
PUSH
CABLE COVERS
7.6
Load cables
into cable cover.
7.7
Clip the cable
cover onto any of the
four post channels.
HINT:
Cable covers have
greater cable capacity.
