AWM-A13 Page 3 of 4
4. Mount monitor
5. Adjust tilt tension & Install security screw
3. Attach VESA head to monitor
3.2.
Attach VESA head onto monitor with provided screws.
3.1.
Check VESA mounting
compatibility.
100mm
75mm
100mm
75mm
NOTE:
For other sizes,
use a suitable adaptor
plate (sold separately).
Flush
Too long
Too short
Spacer
5mm
12mm
NOTE:
Be sure to use a screw
length that suits the monitor.
NOTE:
Spacers may be
required for curved, recessed
or uneven monitor surfaces.
Monitor arm
4.1.
Insert VESA head into the
monitor arm.
4.3.
Push the lever down to
secure it to the arm assembly.
4.2.
Ensure that the VESA head sits flush within
the monitor arm. There should be
no
gap.
Gap
No gap
Tighten
Loosen
Tighten
Loosen
5.1.
Use the allen key to adjust the tilt tension until the
monitor holds in a vertical position at the end of the arm.
NOTE:
Support
monitor while
adjusting
5.2.
(OPTIONAL) To install the optional security
screw tilt the head upwards.
