AF-AN Page 3 of 3
Lift
4.
Install Notebook
4.1
Adjust the support tabs to suit the
width of the notebook computer ensuring
that cable ports are not obstructed
5.1
After plugging in your cables,
install the Cable Covers
4.2
To increase stability, use the self
adhesive Hook-and-Loop Fasteners supplied
• Peel off the backing paper to the fasteners
• Attach fasteners to both the Notebook
Tray and computer
• Ensure that each set of fasteners are
correctly aligned i.e. Hook to Loop
5.3
Cable Clips and Cable Stops can be installed
to further manage cables. Please See Over
Lock Slot
Allen Key
Storage
Loosen
Tighten
Loosen
Tighten
Loosen
Tighten
Loosen
Tighten
Horizontal
Adjustment
±95°
Portrait/Landscape
Rotation
±
5°
±25° Tilt
Elbow joint
‘click’
‘click’
5.
Cable Management
6.
Adjusting the display bracket
Note:
After connecting
the Notebook Cables,
route them through
the Cable Management
Clip on the back of the
Notebook Tray.
Ensure enough cable slack is
given to allow for movement.
Adjust the tilt angle of the
notebook tray as desired,
locking it in position using
the 5mm allen key
TILT (tray angle up/down)
PAN (tray angle left/right)
Insert Cable Covers
up into Lock Slots.
5.2
Push Cable Covers away from
Elbow Joint to secure in place
atdec.com | atdec.co.uk | atdec.com.au
No portion of this document or any artwork contained herein should be reproduced in any way without
the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer
reserves the right to alter specifications without notice. ©20180504B
