ADBS-2x2-17MFB Page 1 of 4
Installation Guide
ADBS-2x2-17MFB
2 x 2 Freestand Floor Video Wall Micro
REQUIRED TOOLS
OPTIONAL TOOLS
• Power driver
• 13mm Hex socket
• Crosshead Screwdriver
• Spirit Level
INSTALL GUIDELINES
COMPONENT & PARTS CHECKLIST
A
ADB-F
Foot
QTY:2
Ref Part name
Qty
A1 Foot Tube
1
A2 Post Support
1
A3 End Cap
2
A4 M8 x 12mm Screw
3
A5 M8 x 45mm Screw
4
A6 5mm Allen Key
1
A7 6mm Allen Key
1
A1
A4
A2
A3
A5
A6
A7
440lbs
200kg
TWO PERSON INSTALL RECOMMENDED.
• Read and understand Installation Safety Instructions before commencing installation.
• Atdec recommends that a professional AV installer or other suitably qualified person
install this product.
• Configurations should be installed in a symmetrical manner for optimal safety.
• Place rail supports (ADB-RPJ, ADB-RUJ, ADB-WP) evenly along the length of a Rail
segment to provide even loading of components.
• Place ADB-U180 uprights and ADB-RUJ Rail Upright Joiners directly behind the
centre of each screen.
• Place ADB-U180 uprights as widely spaced apart as possible for best stability.
• ADB-F must have either ADB-FL or ADB-C attached.
• When attaching displays, attach in an order that ensures stability during installation.
Alternate the loading order such that loads are balanced across to system. Alternate
the side onto which screens are placed to distribute load evenly.
