WARNING:
dŚĞǁŽƌŬůŝŐŚƚŵƵƐƚďĞĐŽŶŶĞĐƚĞĚƚŽĂϭϮϬsƉŽǁĞƌƐŽƵƌĐĞĂƐƐƉĞĐŝĮĞĚ͘ůůǁŝƌŝŶŐƐŚŽƵůĚďĞ
ƉĞƌĨŽƌŵĞĚďLJĂƋƵĂůŝĮĞĚĞůĞĐƚƌŝĐŝĂŶ͘
WARNING:
Disconnect power (unplug the light) before installing or servicing.
WARNING:
To reduce the risk of electric shock, lights should be plugged directly into a properly installed and
grounded 3-prong receptacle. Use only a 3-wire extension cord that has a 3-prong grounding type plug with 3-pole
receptacles that accept the light plug.
WARNING:
dŚŝƐůŝŐŚƚŝƐŶŽƚŝŶƚĞŶĚĞĚƚŽďĞƵƐĞĚŝŶƉŽƚĞŶƟĂůůLJĚĂŶŐĞƌŽƵƐůŽĐĂƟŽŶƐ͕ƐƵĐŚĂƐŇĂŵŵĂďůĞŽƌ
explosive atmospheres.
WARNING:
Keep plugs and receptacles dry.
ATD-8913 13W Fluorescent Work Light
KƉĞƌĂƟŽŶ͗
ϭͿdŚĞůŝŐŚƚŝƐƚƵƌŶĞĚŽŶĂŶĚŽīǁŝƚŚĂƐǁŝƚĐŚůŽĐĂƚĞĚŽŶƚŚĞďĂĐŬŽĨƚŚĞůĂŵƉŚĞĂĚ͘
dͲϴϵϭϯϭϯt&ůƵŽƌĞƐĐĞŶƚƵůďŚĂŶŐŝŶŐ/ŶƐƚƌƵĐƟŽŶƐ
:
1) Unscrew two screws in the top of light head
2) Loosen lens swivel screw
3) Seperate light housing halves, taking care
not to lose the top hook.
4) Tilt lens down
5) Tilt bulb out, saving rubber bulb retainer
for use with your new bulb*.
6) Assembly is reverse of disassembly. Take
care to ensure that the lens lies on top of
the ribs on inside of the light housing.
2
4
5
6TF1-8UXPQJOøPVSFTDFOUCVMCPSFRVJWJMBOU
