Setup - Before Use:
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this power tool.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION:
Make sure that the Power Switch is in the off-position and unplug the tool from
its electrical outlet before performing any procedure in this section.
Note:
For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
ASSEMBLY
Installing the Side Handle
TO PREVENT SERIOUS INJURY:
Do not operate this tool with one hand only or without one of the two handles properly installed.
1. The Side Handle may be installed in one of two
positions, on either side of the Gear Housing.
2. Screw the threaded end of the
Side Handle into the selected position.
Tighten securely before beginning work.
Functions
Backing
Pad
Pad Connector
(under shroud)
Switch
Side Handle
“D” Shaped
Handle
Speed
Control
Operating Instructions
WARNING:
WARNING:
