www.atcom.cn
9
Chapter 4 Software Configuration
1.
Please check if the AX-800P driver has been loaded successfully, run cat /proc/interrupts
command and you should see one line with wctdm.
If you can not see wctdm, you can try to poweroff your server and replug AX-800P into
another PCI slot.
2.
Please use the “dahdi_genconf” command to configure the /etc/dahdi/system.conf file and
generate /etc/asterisk/dahdi-channels.conf file.
[root@localhost ~]# dahdi_genconf
It does not show any output if dahdi_genconf runs successfully.
system.conf
----------------------------------------------------------------------------------------------------------------
# Span 1: WCTDM/16 "Wildcard TDM400P REV E/F Board 17" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxsks=3
echocanceller=mg2,3
fxsks=4
echocanceller=mg2,4
fxsks=5
echocanceller=mg2,5
fxsks=6
echocanceller=mg2,6
fxsks=7
echocanceller=mg2,7
fxsks=8
# Global data
loadzone = us (According to your country)
defaultzone = us (According to your country)
----------------------------------------------------------------------------------------------------------------