AT-610 Quick Start Guide
ATCOM TECHNOLOGY CO., LIMITED
2
、
Configure AT-610 to make VoIP calls
A
、
WAN Config
Enter
Network
Æ
WAN Config
to set the WAN setting:
AT-610 supports three different IP types: Static IP, Dynamic obtain IP (DHCP)
and PPPoE. You can use either of these IP types to connect the internet.
Use Static IP:
----Select “Static”;
----Enter the AT-610’s IP address in the “IP address” field.
----Set the “Net mask”, default 255.255.255.0
----Enter the AT-610’s upper gateway IP address (for example: Router) in the
“Gateway” field
----Key in the DNS information in the “Primary DNS” and “Alter DNS” fields.
Use DHCP:
----Select DHCP
If you have a DHCP server in your network, AT-610 will automatically obtain the
network information from your DHCP server.
Use PPPoE:
----Select PPPoE
----Type your PPPoE dialup information in the PPPoE setting fields: PPPoE server
(option), Username and password.
Then the AT-610 will connect to the internet through PPPoE, and automatically
obtain the IP address, Net mask, Gateway, Primary DNS and Alter DNS
information.
