The Almeria digital panel is equipped with a TFT LCD screen and 5 touch sensitive
buttons to allow easy programming.
Start up
The first time the heater is
turned on it will ask for the
date, the current time and if
you want to activate the
Daylight Savings function.
To input information into the heater use the
▲
and
▼
arrows to select the correct area on the
screen that you would like to change, once the
area is highlighted touch the enter key. This will allow you to change the data, once
the correct information is showing touch enter to save.
Daylight Savings (DST Mode)
The daylight savings feature will automatically adjust the time of
your heater each year on the last Sunday in March and October.
The user will be asked to check want this feature on or off when
the heater is first turned on. It can also be changed from the time
menu. When Daylight Savings is active there is an S shown on the
Screen beside the weekday.
Manual Mode
On first start up and after the date and time are set the heater will
default into manual mode. The screen will show the current set
temperature and manual at the bottom of the screen. The
temperature can be adjusted directly with the
▲
and
▼
keys.
