Entering a program
To enter a program into the Almeria heater bring up the
settings menu from any of the operation screens, select
Program menu and touch enter. When in the Program menu
select Set Program and touch enter.
The Almeria heater will ask the user to
select the day that they want to program,
use the
▲
&
▼
arrows to select the day
and touch enter, this will bring up the blank
programming screen shown on the right. Each “- -“ section can be
individually selected and set.
Select the first - - and touch enter, use the
▲
&
▼
to set an hour
and touch enter to save, move to the minutes and set your required time. When you
move to the off time and select enter, the heater will default
to the following minute after the previous on time. E.g. If you
had entered 07:00, the off time automatically changes to
07:01.
The user can set up to 4 on and off times per day; if a lesser
number of periods is required then the user can skip the
remaining “- -“ and select Save at the bottom of the screen.
The minimum number of periods required to set a program is
one on period and one off period.
In order to activate the program choose “Select” from the Program menu.
Copying a Program
Once you have a program stored on a particular day, that
program can be copied from that day to any other day or group
of days by selecting Copy Program from the Program menu and
choosing the day that has the saved program and touching enter.
