PONG 4P D&B Manual
11/18/2019
52
Step 9 As picture shows below , the height from side A to side C is 10.90 inch.
Utilize the spanner loosen the nuts and turn the adjusting bolt at the same time (clockwise
is to go up, and counterclockwise is to go down), please measure the height first and then
fasten the nuts, to make sure the height is 10.90 inch(277 mm).
Purpose of adjustment: To ensure when the lifting platform lowers down, it flattens on the
cabinet surface at the extreme low position.
Step 10 After fully checking, please install as
Step 1
to
Step 6
in reverse order.
Note: There may have slight difference or tolerance of each cabinet, the height of 10.90
inch is taken as a reference value; if the Platform does not flattens on the cabinet surface,
slight adjustment of the height is recommended and allowable.
Adjusting
bolt
Nut
Side C
Side B
Side A
The height is from
side A to side C, do
not measure it to
side B
×
√
Flatten
√
Not flattens,
needs
adjustment