Atari PONG 4P Operation Manual Download

Page: 22 / 89

PONG 4P D&B Manual

11/18/2019

4.8.2 Cabinet Program Update (SD Card)

Before processing assure you have the following tool.
Kit List:

No.

Part No.

Name

QTY Unit

Note

P163-421-000 SD card

PCS

This

Item Sold

Separately

Step 1 Open Green player(P4) Upper door to locate the SD card Program Update Module.
Insert the SD Card to SD card Program Update Module.

Step 2 Locate Green player(P4) side to restart the machine. The Surrounding light will
become green for about 1 minute.

Step 3 The cabinet will restart automatically. Review the new Program version on the
Display. Remove the SD card.
Note: Displays will show the Program Version(the left 4 characters) and the Music File
Version(the right 3 characters).

Music File
Version

Program
Version

Summary of Contents for PONG 4P


























































































Search results

Summary of Contents for PONG 4P

Reviews:

Related manuals for PONG 4P

Brands by name

Popular brands

Atari PONG 4P, Operation Manual

Search results

Summary of Contents for PONG 4P

Reviews:

Related manuals for PONG 4P

Brands by name

Popular brands