Don't do this - EVER
Reading via EEPROM Burner
Under no circumstances should you attempt to read the FlashCard memory with an
EEPROM Burner. Some EEPROM Burners output 12V on some pins even when it is not
reading. This has no effect on regular EEPROMs because they do not have a problem
with this current. However, the FlashCard can not handle this current, and damage is very
possible.
Connecting via an USB-Hub
When using a USB-Hub, malfunctions and “Connection Aborts“ can occur, so we advise
you to only use the Card with your Motherboard‘s USB ports.
Executing “MProg“ (FDTI Tool)
Never execute the “Mprog“ Program by FTDI.
When changing the Settings, the FlashCard might malfunction or even be damaged.
Cleansers /Cleaning with a Brush
Never use cleansers or abrasives to clean the FlashCard. However, the contacts can be
cleaned using Isopropanol (Isopropyl Alcohol).
Never use a brush to clean the Card. There are ESD-aware brushes which can be used,
though.
Removing the FlashCard from an running Lynx
Always power off your Lynx before removing the FlashCard. Removing the FlashCard from
a running Lynx can damage the Card.
Seite - 21 -
