AT&T Trimline TR1909 User Manual Download Page 31

Page: 31 / 43

Caller ID operation

10 : 03

12/01

REMOvE ALL?

10 : 03

12/01

-END OF LIST-

Copying a call log entry into memory

When you are reviewing call log entries, you can copy the displayed
telephone number to a one-touch or speed dial memory location.

Lift the handset.
Press or to scroll to your desired entry.
Press

PROG

on the handset.

Press any one-touch memory location (

) where you want the number to be stored.

- OR -

Press

MEMORY

, then press the dialing key (

through

) to select the desired speed dial memory location.

Press

CLEAR

on the back of the handset when you have

finished storing a number in the memory to exit programming.

NOTE:

If you wait longer than 10 seconds to delete or copy the entry, the

procedure will time out and you have to begin again.

1.
2.
3.
4.

CALL#
NEW
REP

10 : 03

12/01

800-222-3111

CHARLIE JOHNSON

Deleting call log entries

To delete all call log entries

Press and hold

REMOVE

when reviewing the call log entries.

The screen displays

REMOVE ALL?

Press

REMOVE

again to delete all the

entries. The screen displays

-END OF LIST-

and automatically returns to idle mode.

- OR -

Press

CLEAR

to exit without deleting any

entries and return to idle mode.

NOTE:

When an entry is removed from the call log, it

cannot be retrieved.

Summary of Contents for Trimline TR1909












































Search results

Summary of Contents for Trimline TR1909

Reviews:

Brands by name

Popular brands

AT&T Trimline TR1909, User Manual

Search results

Summary of Contents for Trimline TR1909

Reviews:

Brands by name

Popular brands