manualshive.com logo in svg

AT&T Trimline TR1909, User Manual

Share
Download
AT&T Trimline TR1909 User Manual Download Page 24

20

21

This telephone has 13 memory locations with three 
one-touch memory location keys (

M1

, 

M2

, 

M3

) and 

10 speed dial memory locations (

0

 through 

9

). Each 

location can hold a number up to 32 digits.

To store a number in a one-touch memory location

Follow the steps below to store a number in a one-touch memory 
location:

Lift the handset and press 

PROG

.

Use the dialing keys to enter the number you 
want to store.  
Press 

PAUSE/

REDIAL

 once to store 

a three-second pause in the dialing 
sequence, twice for a six-second pause 
and so on. 

- OR -

 

Press 

PAUSE

/REDIAL

 to store the last 

number dialed.
Press the one-touch memory location 
key (

M1

, 

M2

 or 

M3

) where you want the 

number to be stored. The screen briefly 
displays 

EX

, where 

X

 is the memory location.

NOTES:

When you store a new number in a one-touch memory location, the old entry is 
replaced and cannot be retrieved.
If no action is taken within 10 seconds, the telephone returns to idle mode 
automatically without saving your selection.

1.
2.

3.

•

•

Memory operation (one-touch)

10 : 03

AM

  12/01

8888832445

Pro

10 : 03

AM

  12/01

8888832445

E1 Pro

Telephone memory

Summary of Contents for Trimline TR1909












































Reviews:

No comments

Brands by name

Popular brands

Load more brands