Bluetooth
Bluetooth setup
When the handset displays
Headset A paired to base.
Connect now? Press SELECT
, then press
MENU
/SELECT
on the handset.
When you already have two devices on the active
devices list, the handset shows
Maximum of 2
devices can be connected
. You are prompted to
replace an existing headset on the active devices list
(page ).
When you already have one headset on the active
devices list, the handset shows
Only 1 headset can
be connected
. You are prompted to replace the
headset on the active devices list (page ).
Headset setup completed Device connected
and the corresponding
status icon (
1
or
2
) display when a device is successfully connected.
The corresponding light on the telephone base (
DEVICE1
or
DEVICE2
)
turns on.
NOTES:
The pairing process may take up to one minute. If the pairing process fails, try again.
If you put the handset back in the telephone base or charger while pairing, the process
discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the telephone
base but not connected, the handset displays
Headset
setup completed Device not connected
and then
Auto-connect function enabled Press SELECT
. You can
press
MENU
/SELECT
to exit. You can also connect a device
manually (page 2).
.
•
•
0.
.
2.
Headset A
paired to base.
Connect now?
Press
SELECT
Headset setup
completed
Device
connected
Headset setup
completed
Device not
connected
Auto-connect
function
enabled
Press
SELECT
