Getting started
11
Register a headset to an AT&T DECT telephone base
1. Make sure the battery is properly installed in
the headset (see page 6). The
light on the
headset flashes slowly in red and blue to indicate
the headset is not registered.
2. Place the headset in the headset charger and
allow it to charge for at least one hour before
beginning registration.
3. Remove the headset from the charger.
4. On the telephone base, press and hold
/HANDSET LOCATOR
or
FIND HS
until the
red
IN USE
light turns on (about four seconds) and
then release the button.
If your telephone base has no
/HANDSET LOCATOR or
FIND HS button:
Press and hold the
HOLD
button until the screen
displays
Registering... Please wait
, then release
the button.
-OR-
Press and hold the
/LOCATOR
button until
the screen displays
Registering handset...
, then
release the button.
5. Place the headset back to the charger. The
light flashes
quickly in red and blue.
Adding and registering headsets
