23
About internal and auxiliary ring detectors
Adjust the sensitivity level
The default setting of the ring detector works with most corded
telephones. However, the ring detector might need some
adjustments if the ring tone level of your corded phone is too
soft.
To adjust the ring detector sensitivity while the telephone
is ringing:
Turn the
SENSOR ADJ
knob clockwise
to increase the sensitivity.
Turn the
SENSOR ADJ
knob
counterclockwise to decrease
the sensitivity.
When the ring detector detects the
telephone ringer correctly:
The
STATUS
light on the lifter flashes quickly when the
telephone rings.
The detector sends the ring tone to the headset earpiece.
•
•
•
•
Ring detector on/off
When the ring detector detects an incoming call, it sends a ring
tone to the headset earpiece.
Press the
RING ON/OFF
button on the
lifter to turn the ring detector on or
off. The
STATUS
light is blue when the
ring detector is turned on. The
STATUS
light is red when the ring detector is
turned off.
When the ring detector is turned off,
it does not send a ring tone to the
headset. The light on the headset
does not flash when there is an
incoming call.
NOTE:
When you are using the speakerphone of your telephone, the ring
detector may send a ring tone to the headset. If you do not want the
headset to ring, press the
RING ON/OFF
button to turn the ring detector
off. After the call, you can press the
RING ON/OFF
button again to turn the
ring detector back on.
•
•
