1
After you have installed the
AT&T Softphone Call Manager
,
check to make sure the audio setting is properly configured
in your Windows system. If you have installed Skype and/or
Microsoft Lync and want to use them with your headset,
make sure the audio settings are configured correctly in the
programs as well.
a) Audio settings in Microsoft® Windows® system:
For Windows XP® users:
Click
Start
menu and choose
Control Panel
.
Click
Sounds, Speech, and Audio Devices
and then click
Sounds and Audio Devices
.
Click the
Audio
tab.
Make sure
AT&T DECT Headset
is selected under the
Sound playback
and
Sound recording
settings.
For Windows 7 users:
Click
Start
menu and choose
Control Panel
.
Click
Hardware and Sound
and then click
Manage
audio devices
under the
Sound
menu.
Click the
Playback
tab and make sure
AT&T DECT
Headset
is set as the default speaker.
Click the
Recording
tab and make sure
AT&T DECT
Headset
is set as the default microphone.
1.
i.
ii.
iii.
iv.
i.
ii.
iii.
iv.
Headset base and handset lifter installation
Option 2: Connect the headset to a corded phone and
computer (cont.)
Windows® and Windows XP® are registered trademarks of Microsoft Corporation.
