AT&T TL76108 User Manual Download Page 22

Page: 22 / 99

Telephone operation

Options while on calls

Mute

The mute function allows you to silence the
microphone. You can hear the caller, but the
caller cannot hear you.

Mute a call on a cordless handset:

• Press the

MUTE

softkey to silence the

microphone on the handset.

-OR-

• Press

MUTE

softkey again to resume speaking

on the handset.

Mute a call at the telephone base:

• Press the

MUTE

softkey or the

MUTE

button on

the telephone base and the

MUTE

button light

will turn on.

-OR-

• Press the

MUTE

softkey or the

MUTE

button

again to resume speaking on the telephone

resume speaking on the telephone

base.

When mute is on, the handset screen or
the screen of the telephone base will show

MICROPHONE MUTED

and

will be shown at the

top left corner until mute is turned off.

VOL

HOLD

MUTE

MICROPHONE

MUTED

MUTE

softkey

Summary of Contents for TL76108




































































































Search results

Summary of Contents for TL76108

Reviews:

Related manuals for TL76108

Brands by name

Popular brands

AT&T TL76108, User Manual

Search results

Summary of Contents for TL76108

Reviews:

Related manuals for TL76108

Brands by name

Popular brands