manualshive.com logo in svg

AT&T Partner Plus, Installation And Programming Manual, Page: 79 / 87

Share
Download
AT&T Partner Plus Installation And Programming Manual Download Page 79

You must also notify your local telephone company if and when this equip-
ment is permanently disconnected from the line(s).

Repair Instructions:   If you experience trouble because your equipment is
malfunctioning, the FCC requires that the equipment not be used and that it
be disconnected from the network until the problem has been corrected.
Repairs to this equipment can only be made by the manufacturers, their

authorized agents, or by others who may be authorized by the FCC.  In the
event repairs are needed on this equipment, please contact the National Ser-
vice Assistance Center  (NSAC) at 1 800 628-2888.  For warranty information,
see chapter 9 of the System Manager’s Guide.

Rights of the Local Telephone Company:   If this equipment causes harm
to the telephone network, the local telephone company may discontinue your
service temporarily. If possible, they will notify you in advance.  But if
advance notice is not practical, you will be notified as soon as possible.  You

will 

also be advised of your right to file a complaint with the FCC.

Your local telephone company may make changes in its facilities, equipment,
operations, or procedures that affect the proper functioning of this equip-
ment.  If they do, you will be notified in advance to give you an opportunity to
maintain uninterrupted telephone service.

Hearing Aid Compatibility:   The custom telephones for this system are
compatible with inductively coupled hearing aids as prescribed by the FCC.

C-2  FCC Information

Summary of Contents for Partner Plus
























































































Reviews:

No comments