manualshive.com logo in svg

AT&T Partner Plus, Installation And Programming Manual, Page: 77 / 87

Share
Download
AT&T Partner Plus Installation And Programming Manual Download Page 77

■   

#401—Outgoing Call Restrictions.   Using this procedure, you set one of

three dialing restrictions for each extension:

■

“No restriction” allows long distance, local, and inside calling.

■

“Local only” allows local and inside calling only (make sure the Toll Call
Prefix is set properly, #402).

■

“Inside only” allows inside calls only.

The Outgoing Call Restrictions apply to all lines assigned to that extension.

If the call has not been allowed or stopped by any of the preceding pro-
cedures, the system looks at the Outgoing Call Restrictions for that extension

and determines whether or not the call is allowed.

Dialing Restrictions:

The following diagram shows what happens when a user makes a call.  The sys-

An Example

tem checks the number against  all the dialing restrictions set on the system and
the extension.  When the number passes a restriction, it goes to the next one, if

necessary.  When the number violates a restriction, the call is stopped and the
user hears a reorder (fast busy signal) tone.

In this example, the user is dialing on a line that has an outgoing Call Restriction

set to “local only.” In addition, the extension has an Allowed Phone Number List
with a ”1800” entry on it.  Notice that the system keeps checking the number
until it finds a valid reason to complete it or stop it.

Dial: 1 201 555-1212

Emergency Number?

No, keep checking

Marked System

Speed Dial Number?

No, keep checking

System Password Entered?

No, keep checking

Night Service On?

No, keep checking

Allowed Phone Number?

No, keep checking

Disallowed Phone Number?

No, keep checking

Outgoing Call Restrictions

Violated?

Yes, call dropped and

reorder tone given

Dial:  1 800 555-1212

Emergency Number?

No, keep checking

Marked System

Speed Dial Number?

No, keep checking

System Password Entered?

No, keep checking

Night Service On?

No, keep checking

Allowed Phone Number?

Yes, call completed

Dialing Restrictions Summary  B-3

Summary of Contents for Partner Plus
























































































Reviews:

No comments