AT&T PagePac Plus, Installation And Use Manual

Page: 54 / 61

FCC Statement/Registration and Warranty Information
A
FCC Statement (Part 68)
Component registration for the PagePac Plus Controller has been applied
for from the Federal Communications Communication (FCC) in accordance
with Part 68 of its Rules.
Registered equipment may not be used with Coin Telephone Lines.
Equipment may be used with Party Lines in areas where state tariffs
permit such connections and when equipment is adaptable for such
service.
If trouble is experienced, the equipment should be disconnected
(unplugged) from the interface to determine if this equipment, the host
equipment, or the telephone line is the trouble source. If this equipment is
determined to be malfunctioning, it should not be reconnected until repairs
are effected.
Connection to host equipment is via a 6-position modular jack (74D
Connecting Block). Equivalent connections may be used. This equipment
is designated to be installed in a foolproof manner. Permission of the host
equipment owner, who may determine the means of connection, is
required for connection.
Repairs to this equipment, other than routine repairs, as stated in this
guide can be made only by the manufacturer or its authorized agents.
If the equipment causes harm to the telephone network, the local
telephone company may temporarily discontinue your service and, if
possible, notify you in advance. If advance notice is not practical, you will
be notified as soon as possible. You will be given the opportunity to
correct the problem and informed of your right to file a complaint with the
FCC.
FCC Statement/Registration and Warranty Information
A-1