AT&T OneVision DEFINITY G3 Fault Management and integration User Manual Download Page 105

Page: 105 / 153

DS1 Circuit Pack Reports

Issue 2 April 1996

6-9

You can click on the fields in an alarm report to display screens with more
information about the alarm. See How to Get More Report Information.

DS1 Circuit Pack Reports

DS1 circuit pack reports display all DS1 circuit packs that are administered by
the PBX or that are physically present in the PBX.

You can also create custom reports on the Report Builder screen.

Double click on the following icons for more information about DS1 circuit pack
reports:

Table 6-9.

Field Descriptions for Circuit Pack Reports

Field

Description

Location

The circuit pack’s cabinet, carrier, and slot.

Click on this field to display more information.

Code

The product code for the circuit pack.

Suffix

The suffix of the circuit pack.

Vintage

One of the following:

■

The vintage of the circuit pack.

■

The highlighted word CONFLICT; if there
is a mismatch between the circuit pack’s
administration and type.

Type of Circuit Pack

The external name of the circuit pack.

PORTS

A heading that groups the following port
fields.

Assigned

The number of assigned ports on the circuit
pack.

Unassigned

The number of unassigned ports on the
circuit pack.

TTI

The number of TTI (Terminal Translation
Initialization) ports on the circuit pack. TTI
ports are initialized from the terminal instead
of the administration screen.

Total

The total number of ports on the circuit pack.

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration


























































































































































Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands

AT&T OneVision DEFINITY G3 Fault Management and integration, User Manual

Search results

Summary of Contents for OneVision DEFINITY G3 Fault Management and integration

Reviews:

Related manuals for OneVision DEFINITY G3 Fault Management and integration

Brands by name

Popular brands