AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 98 / 887

Using SPM
2–20
Programming with SPM
SPM Main Menu Options
The SPM Main Menu provides access to system programming and to the SPM
functions listed in Table 2–3.
Table 2–3. SPM Main Menu Options
SPM Menu Function
Sys Program
To program the system
Backup *
To make a backup copy of your system programming and store it
on diskette or on hard disk
Boards *
Shows which modules (port boards) are in each slot of the control
unit and allows you to assign boards to slots
Print Opts
*
Directs reports to the printer or to the PC for storage on diskette or
hard disk
Monitor
*
Restricted to use by your technical support organization
Maintenance
Restricted to use by your technical support organization and
qualified technicians
Restore *
To restore your system programming from diskette or hard disk
Pass-Thru *
(IS II/III only) To make a remote connection, through the control
unit, to an IS II/III PC to administer applications on the IS II/III PC.
Password
*
To change the password for remote entry into the system.
Language
To select a language (English, French, or Spanish) for the console
simulation window on the PC. (There is also a Language option
available on the System Programming menu that allows you to set
the system language.)
*
SPM option only. Not available on the MLX-20L system programming console. To be used
only by qualified service personnel.