AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 694 / 887

Data Features
4–322
Programming Procedures
Data Features
This section covers the programming procedure for analog multiline telephones
connected by a General-Purpose Adapter (GPA) to a data terminal and modem.
Other data programming procedures can be found in earlier sections of this
book (see Table 4–5), with the exception of Ringing options. See Chapter 5,
“Centralized Telephone Programming,” for information about Ringing options.
Table 4–5. Data Features: Programming Procedures
Procedure Section/Chapter
Assign Trunks or Pools to Data
Stations Chapter 3, “Telephones”
Copy Trunk Assignments Chapter 3, “Telephones”
Assign Intercom or System Access
Buttons Chapter 3, “Telephones”
Pool Dial-Out Code
(Hybrid/PBX only)
Chapter 3, “Optional Telephone Features”
Call Restrictions Chapter 3, “Optional Telephone Features”
Copy Call Restrictions Chapter 3, “Optional Telephone Features”
Forced Account Code Entry Chapter 3, “Optional Telephone Features”
Ringing Options Chapter 5, “Centralized Telephone Programming”
Assign Data Hunt Group Members Chapter 3, “Group Calling Member Assignments”
in “Optional Group Features”
Assign Data Hunt Group Trunks
or Pools Chapter 3, “Group Calling Line/Trunk or Pool
Assignments” in “Optional Group Features”
Group Type Chapter 3, “Group Type” in “Optional Group Calling
Features” (choice restricted to Automatic Log ln)