AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 716 / 887

Centralized Telephone
Programming
5
Centralized Telephone Programming
5–1
This chapter describes centralized telephone programming for the system
manager and includes the following information:
■
Accessing centralized telephone programming
■
Programming the features available with this function
■
Programming a single telephone
■
Copying programmed features from one extension to another extension
(Release 2.0 and higher)
See the Feature Reference or the appropriate user or operator guide for details
about each feature.
NOTE:
Only the system manager should perform the programming procedures
described in this chapter.
Introduction
Centralized telephone programming allows the system manager to program any
feature that can be programmed by individual telephone users, or by the system
operator, onto another telephone in the system. Any feature that can be
programmed at an individual telephone can be programmed using centralized
telephone programming.