AT&T MERLIN LEGEND Release 3.1, System Programming Manual

Page: 279 / 887

Optional Group Calling Features
Common Administrative Procedures
3–143
Console Display/Instructions Additional Information PC
6 Save your entry.
Select
Enter Enter
.
0
7 Erase the current external alert extension (
nnnn
) if assigned.
Group Calling xxxx:
xxxx = number entered in Step 5
Enter external alert
extension
nnnn
Backspace Next
Exit Enter
Press Drop .
A+P
8 Specify the extension.
If no DSS is attached :
SP: “Entering an Extension”
Û
9 Save your entry.
Select
Enter Enter
.
0
Next Next
9
Use
Next Next
to program the next calling
group. Return to Step 7.
10 Return to the System Programming menu.
Select
Exit Exit
two times.
55
Group Type
Use this procedure to determine whether or not the system automatically logs in
members of a calling group after a power failure. This setting also determines
the type of voice messaging interface when the calling group is used to connect
voice messaging or automated attendant applications. The settings are listed
below.
■
Automatic Log Out.
Used for calling groups to specify that the system
does not automatically log in calling group members after a power failure.
Calling group members must manually log themselves into the group.
■
Automatic Log In. Used for calling groups that consist of fax machines or
data stations (also called data hunt groups) to specify that the system
automatically logs in calling group members after a power failure. This
setting can also be used for calling groups consisting of telephones.