Programming System Features
PARTNER Systems:
PARTNER II and PARTNER Plus system buttons should be assigned
as follows; 1, 2, 3, and 4 are line or feature buttons (for a PARTNER
system, buttons 1 through 4 are line only):
18
PMUTE
ON
MSG
RANGE
BATT
MERLIN Systems:
It is recommended that you use MERLIN 206/410/820 systems
installed with Feature Package 2 with your wireless phone.
On MERLIN II and MERLIN LEGEND systems, you must connect
your wireless phone to an available jack on either a 408 outside
line/analog telephone module or a 008 analog telephone module.
You must disable the Voice Announce feature. This telephone does
not have a speaker function.
The wireless phone should not be assigned to a paging group.
To program the Ringing Option feature, use the “arrow” and
“rectangle” indicators in the display as the equivalent of red
and green LEDs, respectively.
■
■
■
■
■
■
■
■
For MERLIN II system users, if you program an Auto Intercom button,
idle line preference must be set to intercom.
If any of your incoming lines has the call waiting feature, program the
Recall feature on one of the programmable buttons and press it be-
fore you pick up a waiting call. You can dial #50 before you pick up a
waiting call on the following: MERLIN 206/410/820 systems only with
Feature Package 2, and all MERLIN Plus, MERLIN II, and MERLIN
1030/3070 systems. Pressing the [
On/Off
] button will disconnect the call.
50
