19
Internet Access
Connect Other Devices
You can simultaneously connect up to twenty (20) devices per Wi-Fi network (2.4 GHz
and 5 GHz), forty (40) total, including smartphones, tablets, and laptops, to your AT&T
Wireless Internet device.
1.
Open the Wi-Fi network manager on your Wi-Fi enabled device.
2. Find and select the Wi-Fi network name (SSID):
AWI-XXXXXX
or
AWI-XXXXXX-
GUEST
(guest network disabled by default).
NOTE: The AT&T Wireless Internet device supports both 2.4 GHz and 5 GHz Wi-
Fi networks. You can simultaneously connect up to twenty (20) Wi-Fi enabled
devices on each network.
3. When prompted, enter the Wi-Fi password found on the bottom of the AT&T
Wireless Internet device.
Connect WPS Devices
Wi-Fi Protected Setup (WPS) allows WPS-enabled devices to be connected to a Wi-Fi
network without having to type a Wi-Fi password.
1.
With the AT&T Wireless Internet device powered on, press and hold the
WPS
button for one (1) second.
2. Within two (2) minutes, press the
WPS
button on the wireless device you want to
connect.
3. Your AT&T Wireless Internet device and the wireless device will communicate and
establish the connection.
Connect Via Ethernet
To connect via Ethernet, plug one end of your Ethernet cable in to the Ethernet port
on your computer and the other end in to the Ethernet port on the back of the AT&T
Wireless Internet device.
Summary of Contents for IFWA-40
